Kenwood XH401-4 X-Series 4 Channel Class-D Power Car Amplifier

High level inputs and automatic switch-on Series 4 Channel Class-D Power Car Amplifier. The amplifiers of the XH series can also be connected directly to the high level outputs of an existing car radio to operate via RCA cable. As soon as the signal so obtained is fitted, the amplifier automatically turns on and is therefore not dependent on a separate control line for switching.

Features:

• Class D 4-Channel Power Amplifier
• CEA-2006 compliant
• Hi-Res Audio compliant
• 75W x 4 RMS power output
• Frequency Response 20Hz – 50kHz
• Variable High-Pass Filter
• Variable Low-Pass Filter
• Speaker level input
• Signal sensing turn-on
• Wired remote included for B-channel

Amplifier Features

• Class D Amplifier
• Load Capability 2Ω Stable
• Rated power output (4Ω) 75W x 4 (4Ω)
• Rated power output 75W x 2 + 200W x 1 (4Ω)
• Bridged power output (4Ω) 200W x 2
• CEA-2006 Compliant
• Low-pass Filter
• High-pass Fliter
• Switched Mode Power supply
• Power Indicator Multifunctional
• Signal Sensing Turn-on
• Protection function
• Line in 4 RCA / Speaker level
• Input Selector A/AB
• Speaker level input via line-in (RCA) A-ch & B-ch
• Single Side Terminals
• Chassis Aluminum Die-cast

Amplifier-Specifications

• Rated power output (4Ω, 14,4V) 75W x 4 (20Hz ~ 20000Hz, 1%THD)
• Rated power output (2Ω, 14,4V) 100W x 4 (1000Hz, 1%THD)
• Rated power output (4Ω, 14,4V) 200W x 2 (1000Hz, 1%THD)
• Rated power output (CEA-2006) 75Watts RMS x 4 at 4 ohms and 1% THD
• Low-pass Filter 50~200Hz (-12dB/oct)
• High-pass Fliter 50~200Hz & 2,5~10kHz (-12dB/oct)
• RCA Input Sensitivity 0.2 ~ 5V
• Speaker Level Input Sensitivity 4 ~ 12V
• Input Impedance 10kΩ
• Signal to Noise Ratio 100dB
• Signal to noise ratio (CEA-2006) 76dBa (Reference: 1 Watt into 4 Ohms)
• Frequency response (+0dB, -3dB) 20Hz ~ 50000Hz
• Frequency response (+0dB, -1dB) 20Hz ~ 40000Hz
• Operating voltage 14.4V (11V ～ 16V allowable)
• Maximum current consumption 37A
• Dimensions (WxHxD) 220 x 35 x 169(mm),